Automotive Exhaust Analysers
- Smoke Meter-OMS104
- CO-O2 Analyser-PEA212
- Smoke Meter-OMS101
- 2 Gas Analyser-PEA202
- 5 Gas Analyser-PEA205N
Smoke Meter OMS104
Automotive Exhaust Analysers >> Smoke Meter OMS104
INDUS model OMS104 Smoke Meter is a portable instrument meant to measure smoke density in diesel engine exhaust in conformity with CMVR115/116 as amended upto date. It is certified by ARAI, Pune. Its compactness and light weight are derived from a folded geometry design which is unique to INDUS in India. OMS104 can be operated from the driver's seat by means of a remote unit, which can communicate with the smoke meter through wireless or wired connection. For free acceleration measurements, the engine RPM can be measured by three different sensing methods: clamp-on piezo sensor, battery-based tachometer and magnetically-clamped non-invasive tachometer. A built-in printer is provided to get a hard copy of the results
CO-O2 Analyser PEA212
Automotive Exhaust Analysers >> CO-O2 Analyser PEA212
INDUS CO-O2 Analyser model PEA212 is a handheld analyser meant to measure CO and O2 in automotive exhaust. It is supplied with a steel probe through which the exhaust gas is sucked in and presented to the electrochemical sensors. This battery-operated analyser is a valuable tool for automobile workshops for vehicle tuning for the purpose of improving mileage and minimizing emissions.
Smoke Meter OMS101
Automotive Exhaust Analysers >> Smoke Meter OMS101
2 Gas Analyser
Automotive Exhaust Analysers >> 2 Gas Analyser
INDUS model PEA202 is a 2-gas analyser meant to measure CO and HC in automotive exhaust. Both these gases are detected by NDIR method. PEA202 features a built-in dot matrix printer which provides a hard copy of the results of measurement. It is certified by ARAI, Pune.
5 Gas Analyser-PEA205N
Automotive Exhaust Analysers >> 5 Gas Analyser
INDUS model PEA205N is a 5-gas analyser meant for monitoring CO, CO2, HC, O2 and NO in automotive exhaust. It meets OIML Class-I specifications. CO, CO2 and HC (Hydrocarbon residue) are measured by NDIR technology and O2 and NO by electrochemical sensors. It is also supplied as a 4-gas analyser which can be upgraded easily to 5-gas version by the addition of an NO sensor. It has many control features to prevent faulty measurements. A built-in dot matrix printer is provided to print out a hard copy of the results. It conforms to CMVR 115/116 and is certified by ARAI, Pune.